Efficient photon coupling from a diamond nitrogen vacancy center by integration with silica fiber
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2016-02-12 |
| Journal | Light Science & Applications |
| Authors | Rishi N Patel, Tim Schröder, Noel Wan, Luozhou Li, Sara L Mouradian |
| Institutions | Massachusetts Institute of Technology, Stanford University |
| Citations | 81 |
| Analysis | Full AI Review Included |
Technical Documentation & Analysis: Fiber-Integrated NV Center Coupling
Section titled “Technical Documentation & Analysis: Fiber-Integrated NV Center Coupling”Research Paper Analyzed: Efficient photon coupling from a diamond nitrogen vacancy center by integration with silica fiber (Patel et al., Light: Science & Applications, 2016)
Executive Summary
Section titled “Executive Summary”This paper presents a robust, alignment-free approach for coupling single photons emitted by a Nitrogen Vacancy (NV) center in diamond directly into a single-mode silica optical fiber, a critical advance for quantum networking and single-photon source applications.
- Core Achievement: Demonstration of a compact, highly efficient interface using adiabatic power transfer between a high-quality, MPCVD-grown diamond micro-waveguide and a tapered silica fiber.
- Material Basis: Requires 200 nm thick, [100] electronic grade Single Crystal Diamond (SCD) thin films for lithographic patterning into micro-waveguides.
- Performance Metrics: Achieved high raw single photon detection rates exceeding 600,000 cps (estimated saturation rate > 700 kHz).
- Quantum Purity: Demonstrated exceptionally low raw anti-bunching signals, g(2)(0) < 0.2, confirming single NV operation without relying on background subtraction.
- Efficiency: Overall photon collection efficiency ranged between 16% and 37%, representing a roughly fourfold improvement over previous fiber-coupled approaches utilizing diamond point emitters.
- Methodology: Integration achieved via a deterministic pick-and-place technique, utilizing van der Waals forces for reliable adhesion between the tapered structures.
- Future Impact: This geometry enables efficient optical access for coherent spin manipulation and extends potential to evanescently integrate diamond nano-cavities for enhanced quantum communication.
Technical Specifications
Section titled “Technical Specifications”Extraction of key physical and performance parameters from the study.
| Parameter | Value | Unit | Context |
|---|---|---|---|
| Diamond Material Type | Synthetic [100] SCD | Dimensionless | Electronic Grade, High-Quality CVD |
| Diamond Film Thickness | 200 | nm | Required for micro-waveguide fabrication |
| Waveguide Total Length | 12 | µm | Includes both taper sections |
| Waveguide Center Width | 2 | µm | Constant width section |
| Taper Length (Individual) | 5 | µm | Triangular taper on each side |
| Integrated Fiber Diameter | ≈500 | nm | Tapered silica fiber waist |
| NV Zero Phonon Line (ZPL) | ≈637 | nm | Characteristic emission peak |
| NV Center Lifetime (τNV) | 15.7 ± 1.1 | ns | Measured lifetime (inverse time constant 1/τ1) |
| Saturation Photon Count Rate (Isat) | (712 ± 24) * 103 | cps | Combined collection from both fiber ends |
| Anti-Bunching (g(2)(0)) | < 0.2 | Dimensionless | Raw measurement (no background subtraction) |
| Maximum Incident Pump Power | 2.25 | mW | Limit before g(2)(0) > 0.5 due to background emission |
| Overall Collection Efficiency (ηC) | 16 to 37 | % | Range of estimated lower and upper bounds |
Key Methodologies
Section titled “Key Methodologies”A concise sequence detailing the fabrication and integration of the diamond/fiber system.
- Fiber Tapering: Standard heat-and-pull technique applied to single-mode optical fiber (Thorlabs 630HP). The pull was monitored using 630 nm laser transmission and halted when transmission dropped, yielding a fiber waist diameter of approximately 500 nm.
- Diamond Micro-Waveguide Definition: Micro-waveguides (12 µm long, 2 µm wide center section, 5 µm tapers) were fabricated from a 200 nm thick film of [100] electronic grade synthetic CVD diamond. This utilized transferred hard mask lithography.
- NV Center Selection: Individual micro-waveguides were optically characterized to select those containing exactly one high-quality NV memory center.
- Deterministic Integration: A tungsten micro-manipulator tip was used to detach and precisely position the selected diamond micro-waveguide onto the waist of the tapered fiber, adhering via van der Waals forces.
- Optical Excitation: The NV center was pumped using a 532 nm laser focused through a high Numerical Aperture (NA = 0.75) objective.
- Photon Collection and Filtering: The NV fluorescence signal was collected directly through both the left and right fiber ends and filtered using two 550 nm long-pass filters before detection by Avalanche Photo-Diodes (APDs).
- Characterization: Photon count rates, saturation behavior, and second-order autocorrelation measurements (Hanbury Brown-Twiss setup) were performed to confirm single-photon emission and efficiency.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”6CCVD provides the specialized MPCVD diamond materials and engineering services required to replicate, scale, and advance the fiber-integrated NV system demonstrated in this research. Our capabilities directly address the material constraints and scalability challenges cited by the authors (e.g., improving low fabrication yield and reducing optical losses).
Applicable Materials
Section titled “Applicable Materials”To replicate and enhance the performance of the NV-fiber coupler, 6CCVD recommends:
- Optical Grade Single Crystal Diamond (SCD): Required for maximizing NV coherence times and minimizing internal scattering losses. We specifically offer high-purity, electronic grade [100]-oriented SCD wafers, matching the required crystal direction for optimal NV alignment.
- Custom Thin Film Thickness: We provide SCD membranes grown and processed to precise thicknesses from 0.1 µm up to 500 µm. This is critical for meeting the 200 nm requirement for ideal mode-matching and adiabatic coupling optimization.
- High-Surface Quality Substrates: SCD polished surfaces with Ra < 1 nm are available, essential for minimizing surface scattering, which is a limiting factor for coupling efficiency and broadband adiabatic power transfer (Figure 2e).
Customization Potential
Section titled “Customization Potential”The success of this method hinges on highly precise dimensions and integration features.
| Custom Service | Relevance to Research Requirements | 6CCVD Advantage |
|---|---|---|
| Custom Wafer Dimensions | Supports upscaling the fabrication process, addressing the low 5%-10% yield cited by the authors. | Plates/wafers available up to 125 mm (PCD/SCD integration support), facilitating larger-scale lithographic patterning. |
| High-Precision Laser Cutting | Required for creating the complex tapered micro-waveguide geometries (12 µm length, 2 µm width, 5 µm tapers) and specialized separation features for the pick-and-place method. | In-house precision cutting allows the production of transfer-ready membranes and specialized substrate geometries with micron-level tolerance. |
| Advanced Metalization | Essential for future implementations, such as creating fiber-integrated Bragg filters for pump rejection, or integrating electrical contacts for coherent Electron Spin Resonance (ESR) control (Figure 4f inset). | Internal capability for depositing common contact materials including Au, Pt, Pd, Ti, W, and Cu, suitable for subsequent cleanroom processes. |
Engineering Support
Section titled “Engineering Support”6CCVD’s in-house PhD team provides specialized consultation to accelerate research in diamond nanophotonics. We can assist with:
- Material Selection and Orientation: Optimizing SCD purity and crystal orientation for maximum NV center creation yield and spin coherence in demanding quantum networking projects.
- Interface Optimization: Consulting on ideal film thickness and surface treatment required for successful adiabatic coupling to various optical fibers and photonic integrated circuits.
- Post-Processing Integration: Providing guidance on metalization stacks compatible with subsequent micro-manipulation and low-temperature (cryogenic) operation.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) center in diamond, with a single-mode optical fiber. In this approach, single-mode tapered diamond waveguides containing exactly one high quality NV memory are selected and integrated on tapered silica fibers. Numerical optimization of an adiabatic coupler indicates that near-unity-efficiency photon transfer is possible between the two modes. Experimentally, we find an overall collection efficiency between 16% and 37% and estimate a single photon count rate at saturation above 700 kHz. This integrated system enables robust, alignment-free, and efficient interfacing of single-mode optical fibers with single photon emitters and quantum memories in solids. A compact way to efficiently couple a solid-state qubit, the nitrogen vacancy center in diamond, with a single-mode optical fiber is shown. The ability to efficiently couple stationary quantum memories to a single spatial mode in a silica fiber is highly desired for various applications in quantum information processing. Now, Rishi Patel and co-workers, working in the group of Dirk Englund at the Massachusetts Institute of Technology have proposed and experimentally demonstrated an approach involving adiabatic power transfer between a tapered silica fiber and a single-mode micro-waveguide made from high-quality diamond. This integrated diamond-silica waveguide system enables optical collection from nitrogen vacancy centers with overall efficiencies in the range 16%-37%—a roughly four-fold improvement over previous approaches that employed diamond point emitters rather than waveguiding structures. Numerical optimization analysis suggests that near-unity efficiencies are theoretically feasible.