Complete coherent control of silicon vacancies in diamond nanopillars containing single defect centers
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2017-10-20 |
| Journal | Optica |
| Authors | Jingyuan Linda Zhang, Konstantinos G. Lagoudakis, Yan‐Kai Tzeng, Constantin Dory, Marina Radulaski |
| Institutions | Stanford University |
| Citations | 41 |
| Analysis | Full AI Review Included |
Technical Documentation: Coherent Control of SiV Centers in Diamond Nanopillars
Section titled “Technical Documentation: Coherent Control of SiV Centers in Diamond Nanopillars”Executive Summary
Section titled “Executive Summary”- Objective: Demonstration of complete SU(2) coherent control over single Silicon-Vacancy (SiV) centers embedded in diamond nanopillar arrays for scalable quantum information processing.
- Material Platform: Single Crystal Diamond (SCD) homoepitaxial layer (100 nm) doped with SiV centers grown via Microwave Plasma Chemical Vapor Deposition (MPCVD).
- Key Achievement: Ultrafast all-optical coherent manipulation of the excited state population on picosecond timescales (9.1 ps pulse duration).
- Coherence Performance: Achieved a dephasing time T2* of 240 ps, closely matching the 1.7 ns excited state lifetime limit.
- Fabrication Yield: 31.3% yield of isolated single SiV centers per nanopillar across an 8x8 array (135-170 nm diameter, 200 nm height).
- Emission Characteristics: SiV centers exhibit narrow inhomogeneous broadening and high spectral stability, even when positioned within 75 nm of the diamond-air interface.
- Significance: Establishes a foundational on-chip architecture for quantum repeaters, spin-photon interfaces, and scalable nanophotonic integration.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Substrate Type | Type IIa (High Purity) | - | Element Six single crystal diamond substrate |
| Epilayer Thickness | 100 | nm | Homoepitaxial growth layer |
| SiV Density | ~3 × 1014 | cm-3 | Calculated from Poisson distribution in arrays |
| Nanopillar Diameter | 135 - 170 | nm | E-beam lithography patterned geometry |
| Nanopillar Height | 200 | nm | Optimized to confine SiV layer |
| Yield (Single SiV / Pillar) | 31.3 | % | 20 out of 64 nanopillars |
| Operating Temperature | 10 | K | Liquid helium cryostat for PL spectroscopy |
| ZPL Emission (SiV) | ~737 | nm | Zero phonon line transition energy |
| Excitation Wavelength (Confocal) | 532 | nm | CW green laser for PL mapping |
| Excitation Wavelength (Resonant) | ~720 | nm | Above-bandgap for spectroscopy |
| Pulse Duration | 9.1 | ps | Time-bandwidth limited Gaussian |
| Dephasing Time (T2*) | ~240 | ps | Extracted from Ramsey interference decay |
| Excited State Lifetime | 1.7 | ns | Liquid helium temperature |
| Distance to Surface | < 75 | nm | Critical metric for near-surface stability |
| Resolution (Spectrometer) | ~5.0 | GHz | Custom double-grating spectrometer |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: Commenced with a high-purity Type IIa single crystal diamond substrate.
- SiV Incorporation via MPCVD:
- H2 flow: 300 sccm
- CH4 flow: 0.5 sccm
- Stage Temperature: 650 °C
- Microwave Power: 1.3 kW
- Chamber Pressure: 23 Torr
- Si Source: Hydrogen plasma etching of a silicon wafer placed beneath the diamond substrate.
- Nanopillar Fabrication:
- Masking: Hydrogen silsesquioxane (HSQ) negative tone resist patterned via electron-beam lithography.
- Etching: Oxygen-based Reactive Ion Etching (RIE) to transfer the pattern into the diamond bulk.
- Mask Removal: Hydrofluoric acid dip to strip the HSQ mask.
- Optical Characterization:
- Confocal PL mapping using a 532 nm CW laser and a 0.75 NA objective.
- Spectral filtering via a custom-built double-grating spectrometer (~5.0 GHz resolution).
- Coherent Control Protocol:
- Resonant addressing of transition |2⟩ ↔ |4⟩ using spectrally filtered picosecond pulses from a mode-locked Ti:Sapphire laser.
- Detection via radiative emission from transition |3⟩ → |1⟩ to avoid laser leakage.
- Pulse delay control implemented using a Michelson interferometer with coarse (motorized) and fine (piezoelectric) delay stages.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”This research highlights the strict tolerances required for next-generation quantum photonics, specifically regarding surface proximity, isotopic purity, and crystalline perfection. 6CCVD provides the foundational material stack required to replicate or extend these findings.
- Applicable Materials:
- For replicating the optical and spin properties detailed in this study, we highly recommend our Optical Grade Single Crystal Diamond (SCD) plates. Our MPCVD-grown SCD ensures the low strain environment necessary to preserve the long coherence times (T2* ~240 ps) observed in the paper. We can supply SCD in thicknesses ranging from 0.1 µm to 500 µm to match your specific layer requirements.
- Customization Potential:
- Wafer Dimensions: We can produce custom plates and wafers up to 125mm in diameter, providing a robust platform for large-scale nanophotonic array fabrication.
- Thin Film Epitaxy: If your research requires specifically doped epitaxial layers (like the 100 nm SiV-doped layer used here), our team can collaborate on custom MPCVD recipes.
- Metallization & Structuring: For devices requiring electrical control, spin readout, or integration with other photonic platforms (e.g., silicon carbide or silicon nitride), our in-house capabilities include custom metallization (Au, Pt, Pd, Ti, W, Cu) and precision laser cutting to deliver devices ready for nanofabrication.
- Engineering Support:
- Navigating the challenges of diamond nanostructuring—especially the mitigation of spectral diffusion and strain near the diamond-air interface—requires exceptionally high-quality starting material. 6CCVD’s in-house PhD engineering team is available to assist with material selection for quantum computing, cavity QED, and nanophotonic projects. We can provide consultation on optimizing substrate selection to maximize the yield of shallow, high-stability defect centers.
- Call to Action: For custom specifications, bulk substrate orders, or material consultation for your quantum hardware development, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Arrays of identical and individually addressable qubits lay the foundation for the creation of scalable quantum hardware such as quantum processors and repeaters. Silicon-vacancy (SiV) centers in diamond offer excellent physical properties such as low inhomogeneous broadening, fast photon emission, and a large Debye-Waller factor. The possibility for all-optical ultrafast manipulation and techniques to extend the spin coherence times makes them promising candidates for qubits. Here, we have developed arrays of nanopillars containing single (SiV) centers with high yield, and we demonstrate ultrafast all-optical complete coherent control of the excited state population of a single SiV center at the optical transition frequency. The high quality of the chemical vapor deposition (CVD) grown SiV centers provides excellent spectral stability, which allows us to coherently manipulate and quasi-resonantly read out the excited state population of individual SiV centers on picosecond timescales using ultrafast optical pulses. Furthermore, this work opens new opportunities to create a scalable on-chip diamond platform for quantum information processing and scalable nanophotonics applications.