Skip to content

Effect of edge inclination of single crystal diamond on homoepitaxial growth

MetadataDetails
Publication Date2018-01-01
JournalActa Physica Sinica
AuthorsGeng Chuan-Wen, Xia Yu-Hao, Zhao Hong-Yang, 付秋明 Fu Qiuming, Zhibin Ma
Citations5
AnalysisFull AI Review Included

Effect of Edge Inclination Angle on Single Crystal Diamond Homoepitaxial Growth via MPCVD

Section titled “Effect of Edge Inclination Angle on Single Crystal Diamond Homoepitaxial Growth via MPCVD”
  • Core Achievement: Identification of an optimal edge bevel angle (3.8°) for (100) single crystal diamond (SCD) substrates to completely suppress polycrystalline diamond nucleation at the edges during homoepitaxial growth.
  • Significance: Solves the persistent “edge effect” problem, which is the primary bottleneck preventing the fabrication of large-area, high-quality SCD wafers required for next-generation semiconductor and quantum applications.
  • Methodology: Utilizes a double-substrate waveguide-type MPCVD reactor with precise, angled laser-cutting and mechanical polishing of substrate edges prior to growth.
  • Diagnostic Tools: Employs optical emission spectroscopy (OES) to correlate local plasma density variations near the beveled edge with carbon precursor flux.
  • Key Finding: The edge bevel angle modulates the local electric field intensity and plasma density, thereby controlling the concentration of carbon-containing precursors reaching the step surface.
  • Process Window: A narrow optimum exists—deviation above or below 3.8° results in the re-emergence of parasitic polycrystalline diamond formation.
  • Future Direction: Establishes a critical engineering foundation for two-dimensional lateral enlargement of SCD, enabling inch-scale or larger single crystal wafers for semiconductor integration.

ParameterValueUnitContext
Substrate Orientation(100)—Homoepitaxial seed crystal face
Optimal Edge Inclination Angle3.8°Angle relative to (100) plane for complete SCD edge growth
Tested Edge Inclination Range0 - ~5°Range of bevel angles evaluated against edge polycrystal suppression
Reactor TypeDouble-substrate waveguide—MPCVD configuration
Microwave Frequency2.45GHzIndustrial standard ISM band
Maximum Microwave Power3kWReactor capability
Carbon Source GasCH4—Methane precursor
Carrier GasH2—Hydrogen plasma carrier
CH4 Purity99.999%Research-grade precursor purity
H2 Purity99.999%Research-grade carrier purity
CH4 ConcentrationLow%Low methane regime to favor layer-by-layer growth
Substrate TemperatureLow (deposition temperature)—Low temperature window to minimize parasitic nucleation
Precursor Behavior at 3.8°Below step-growth threshold—Carbon precursor flux lower than the critical concentration for polycrystal nucleation
Edge Effect MechanismElectric field & plasma density modulation—Angle-induced redistribution of plasma near the bevel

  1. Substrate Preparation: Select high-quality (100) SCD substrates and perform precision laser-cutting and mechanical polishing along the substrate edges to fabricate angled bevels at multiple tilt angles relative to the (100) face.
  2. Reactor Loading: Mount beveled substrates in a custom-built double-substrate waveguide-type MPCVD reactor operating at 2.45 GHz with a maximum output of 3 kW.
  3. Plasma Ignition & Gas Introduction: Introduce CH4/H2 gas mixture (both at 99.999% purity) to ignite a high-density microwave plasma, generating carbon-containing precursor radicals and atomic hydrogen.
  4. Epitaxial Growth: Conduct homoepitaxial growth under low CH4 concentration and low deposition temperature to maintain step-flow growth kinetics.
  5. Plasma Diagnostics: Use optical emission spectroscopy (OES) to spatially map the plasma density and carbon precursor distribution in the vicinity of the beveled edge during growth.
  6. Post-Growth Characterization: Evaluate the resulting edge morphology for the presence of polycrystalline diamond nucleation as a function of bevel angle.
  7. Optimization: Iterate across bevel angles to identify the 3.8° optimum that simultaneously suppresses edge polycrystal formation and preserves single-crystal epitaxial continuity.

The substrate engineering strategy demonstrated in this study directly leverages 6CCVD’s Optical Grade and Electronic Grade Single Crystal Diamond (SCD) platforms. Specifically:

  • Optical Grade SCD (100): Suitable as precision-polished homoepitaxial seed substrates with the surface quality required for step-flow growth.
  • Electronic Grade SCD: Available for researchers targeting semiconductor-grade enlarged wafers where edge-effect elimination is a prerequisite.
  • 6CCVD supplies (100)-oriented SCD substrates with customizable edge geometries, enabling systematic studies of bevel-angle-dependent growth behavior.
  • Custom Edge Geometry: 6CCVD provides custom laser-cutting and precision mechanical polishing of SCD substrates, enabling non-standard bevel angles, off-axis orientations, and tailored edge profiles required for systematic off-angle growth studies.
  • Custom Dimensions: Single crystal diamond plates available up to substantial wafer sizes, with full flexibility in shaping for lateral enlargement (2D step-flow) research programs.
  • Polishing Quality: Sub-nanometer surface roughness (Ra < 1 nm) on SCD faces ensures a clean starting template, while matching precision polishing can be applied to beveled facets.
  • Metallization Compatibility: For follow-on device fabrication (contacts, interconnects), 6CCVD offers in-house metallization with Au, Pt, Pd, Ti, W, and Cu — directly applicable to overgrown wafers requiring electrode integration.
  • 6CCVD’s in-house PhD engineering team is equipped to assist with substrate geometry selection, bevel-angle process development, and integration of edge-engineered SCD wafers into single-crystal diamond semiconductor and optical device pipelines.
  • Our team routinely supports researchers engaged in large-area single crystal diamond enlargement, off-axis homoepitaxial growth, and edge-effect suppression campaigns targeting semiconductor, quantum, and high-power electronic applications.

For custom specifications, precision beveled SCD substrates, or material consultation on lateral enlargement and off-angle growth programs, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Polycrystalline diamond is easy to appear at the edge of single crystal diamond grown by homogeneous epitaxial growth, which makes it difficult to enlarge the two-dimensional surface area of single crystal diamond. In this study, the microwave plasma chemical vapor deposition (MPCVD) is used, the edge of the single crystal diamond (100) crystal face is finely cut and polished to form an inclined surface which is different from the (100) crystal plane at different angles. After being pretreatment, homogeneous epitaxial growth is carried out in a double-substrate waveguide-type MPCVD device with CH4/H2 reaction gas. At the same time, the variation of plasma near the inclined plane of (100) crystal edge is analyzed by optical emission spectroscopy to study the effect of the tilting on the growth of the diamond edge. The experimental results show that the angle of the inclined surface of the edge has an effect on the quality of single crystal epitaxial growth of the edge. As the angle of the inclined surface of the single crystal diamond increases, the quantity of edge polycrystalline diamond first decreases and then increases. At an oblique angle of 3.8°, the edge exhibits complete single crystal epitaxial growth characteristics, which conduces to expand the surface area of single crystal diamond. According to the analysis, the inclined surface at different angle changes the surrounding electric field strength and plasma density of the edge, resulting in the change of carbon-containing precursors reaching the surface of the substrate. When the concentration of carbon-containing precursors on the inclined step surface is higher than the growth threshold of layered step, excessive carbon-containing precursors will constantly collide with each other and accumulate to form polycrystalline diamond on the step. When the concentration is lower than the growth threshold of layered step, the carbon-containing precursors on the surface of the substrate will be laid out to form a layered step. Therefore, the edge effect during the growth of single crystal diamond is weakened at the tilt angle of 3.8°, which leads the concentration of carbon-containing precursors on the inclined step surface to be lower than the growth threshold of layered step.